MB DISPLACEMENT GEAR PUMP

Monoblock electric pump for the transfer and circulation of lubricating fluids.

Compact and with small dimensions, it is particularly suitable for the transfer and circulation of oils, naphtha, diesel oil and other fluids with lubricating characteristics.

Made of cast iron with hardened steel gears and seal suitable for the fluid to be pumped, it is coupled via an I.E.C. B3/B14 shaped, three-phase, single-phase, explosion-proof, flexible joint, also with special voltages, as required.
Version with or without built-in by-pass valve.

Use limits

Flow rate: from 1,6 to 60 lt/1′
Pressure: 6 bar – 87 psi
Viscosity: from 1 to 300 mPa s
Temperature: 120°C – 248°F

PQ MB INLET DIAMETER cc/rev FLOW RATE lt/1’ a 1450 revs 4-POLE KW MOTOR WEIGHT KG
1,6 3/8″ 1,37 1,98 0,25 9
3 1/2″ 2,11 3 0,25 10
5 4,23 6,1 0,25 10
10 7,06 10 0,37 10
15 3/4″ 10,59 15,5 0,55 13
20 14,13 20,5 0,55 14
30 1″ 23,15 33,5 1,1 25
40 29,29 42,5 1,1 26
50 35,39 51,5 1,5 29
60 43,33 63 1,5 30

The data and specifications are not binding and are subject to possible changes.