PPV – VARIABLE FLOW DISPLACEMENT PUMPS

With manual or automatic remote control.

PPV series displacement pump with variable set-up also with automatic flow control (blending in line), with heating jacket, able to precisely maintain the flow rate programmed from time to time.

Particularly suitable for mixing systems, drum filling systems and anywhere else it is necessary to change the flow rate.

Executions and seals on the shaft according to the application.

Safety valve on request.

For products of the petrochemical, detergent, food and confectionery, chemical-pharmaceutical, polyurethanes and polymer industries.

Use limits

Flow rate: from 0 to 60 m³/h
Pressure: 10 bar – 145 psi
Viscosity: 5000 mPa s
Temperature: 150°C – 302°F

MC Manual with handwheel, also to accommodate any variations in the process conditions
MCS similar to MC, but with automatic adaptation to the variations of exercise in delivery
SC remote pre-configuration by means of pneumatic servo-control with adjustment as for MCS
SCR as for SC, with rapid return to zero flow (1 sec.) upon completed cycle (particularly suitable for drum filling systems)
SCV possibility to continuously manage the pump with the computer, with precise maintenance of the flow rate thanks to a special hydropneumatic system (particularly suitable for mixing different components, with several pumps regulated at a variety of flow rates. Blending in line)

In all the cases described, the pump speed remains constant even when the flow rate varies.

PPV m³/h cc/rev revs at 1’ bar KW Kg
400 0÷20 800 420 10 7,5 220
1500 0÷40 1700 400 10 18 480
3600 0÷60 2800 360 10 30 500
PPV 400 1500 3600
A 590 750 750
B 385 510 510
C 205 240 240
D 195 170 170
E 440 600 600
F 3″ 4″ 6″
G 225 310 310
H 580 740 740
H1 1020 1120 1120
H2 1100 1200 1200
L 430 430 430
M 150 150 150
N 240 320 320
O 15 18 18
P 300 400 400
R 90 120 120
S 130 180 180
T 30 40 40
U 35 55 55
V 10×80 16×110 16×110

The data and specifications are not binding and are subject to possible changes.